They weren’t smart enough to maximize shareholder value :P
I wish companies understood that no, I don’t need my washing machine to be connected to WiFi
Yeah, but they want their washing machine in your home to have wifi.
^as said by somebody who never had to replace the motor on their washer, or the burned on their range, or the belt on their dryer, or the elements in the water heater…
The reason they always worked forever was because your dad bought replacement parts from the appliance repair store and didn’t complain to you about it.
This is literally one of the top 3 good things about YouTube
Useless em dash -_-
Survivorship bias.
“They built them better in the old days, look at this one that survived” whilst ignoring the millions of fridges and washing machines that ended up in landfill and scrap metal yards.
You can buy appliances without smart features still?
Best Buy has dozens, if not hundreds, of fridges without smart features. I can buy a 18cu top freezer fridge for $450 right now.
That same type of fridge back in the 1970s cost $300-$400. Adjusted for inflation that’s $2,000
So I don’t get this post. You can buy cheap fridges still and it’ll probably last a long time if you take care of it. Read repair reports or Google random problems for a fridge you’re looking to buy to see the most common failure points and see what the repair cost would be to factor in future costs.
Stupid post.
Just got rid of my fancy younger washer after spending $240 on repairs for the second time only to have it fail again.
Went and pulled my ancient Whirlpool direct drive out of storage, spent $15 on the replacement clutch and coupler it needed and threw them in there.
Thing turns 30 years old this year and it’s going like a champ.
Adjusted for inflation, they also cost ~$3,000 each.
If you want a simple, basic, but very reliable appliance and are willing to pay $3,000 for it, there are brands existing today that will sell one to you.
(Or, you know, just buy some old used ones and make minor repairs if necessary.)
Survivorship bias. All the ones that broke aren’t around anymore.
Another issue is we’ve been trained to treat major appliances as disposable. Back in the day you called a repairman.
For example, my mom’s washer stopped doing the spin cycle. She immediately hopped on Consumer Reports to shop for a new one.
I hopped on an appliance parts website and ordered her a new lid switch for $15. One YouTube video later and her washer worked like new.
My fridge stopped working correctly, only the freezer part would actually cool. I called the local service company. Tech came when I wasn’t home, told my partner “compressor’s broken, though shit” , took 60€ and left.
My combination washer dryer has stopped drying. From what I gather it seems like a compressor gas leak, guess what? Too expensive to fix, so I would have to throw away several tens of kilos of machine just because of a fart’s worth of gas.
I have a Neato robot vacuum which I’ve kept clean and repaired for years, only for fucking Vorwerk, may they go bankrupt tomorrow, to shut down its servers, so now it’s dumb as a rock and next to useless.
It’s not your mother’s fault for assuming a malfunctioning appliance must be replaced.
to shut down its servers, so now it’s dumb as a rock and next to useless.
I hate this so much. There’s no reason a robot vacuum should require internet access to function. Companies only do it for tighter control of their products, to track your usage, to have the ability to paywall features, and to have the ability to disable it so you have to buy a new one.
That’s very much the plot to Cory Doctorow’s short story Unauthorized Bread. The toaster company turned off the servers and some people got real tech savvy real quick.
The enshittification of everything will eventually lead to some small companies making good quality long lasting appliances I hope, they will make a good name for themselves and have easily repairable parts, but since we live in the real world whirlpool or GE will buy them keep the branding and make it more “intelligent” and easily breakable by adding computer parts that aren’t needed and plastic parts that will fail and not be able to be repaired or replaced.
Don’t count on it. Instant Pot managed to sell so many units they’re in what seems like almost every kitchen. And then that was that, because everyone already had one, so their sales volume plummeted and they went bankrupt. I still use mine all the time, but the original company went away.
Back in the day you called a repairman.
That guy’s time is worth probably $30/hour, so if you want to use up his 8 hour day you’d better be willing to pay $240, plus parts, plus the gas money of driving his truck to your home, plus the cost of keeping those parts on hand and the truck available.
Or if it’s something he knows is only a half day job, then he can book something else so that he only really needs to charge you $120.
Now that a lot of these appliances are like $500, it’s pretty hard to justify the cost of professional repair.
50 years ago, when the price of an appliance was something like 50 hours of a repairman’s hourly wage, it made a lot of sense for most issues to be fixed by a professional. Now that these appliances are worth like 15-20 worker hours, it’s much harder to justify.
They only cost 15-20h of work because they’re built like a pile of leafs in the wind. Look at it wrong and it’ll break.
Also, appliances were way more expensive – both to purchase and (thanks to wasteful energy etc. usage) to operate. Bens Appliances and Junk has a good video on this that I imagine a lot of people are drawing on in this thread.
The problem is that they’re not designed to be repairable
Not necessarily. Less parts, less complex mechanisms = lower probability of something breaking down.
Also there was a time where companies actually cared. They would send the engineers for the next model out with service techs servicing current models to help them find the common failure points and help make things more servicable.
Also there was a time where companies actually cared.
:-/
Planned Obselence was pioneered nearly a century ago. You might have individual service reps or salesman with a soul. But no company has ever carried about more than profits.
Longevity was supposedly a goal for manufacturers in the GDR.
in the GDR
Yes, but that’s Evil Communism. Didn’t you see the movie “The Dryers of Others”?
They were way more repairable though. We had a gas dryer that lasted 40 years and was only replaced because we moved somewhere without gas.
It was basically a big egg timer with an electric motor and a gas burner. You could fix anything on it with a crescent wrench, screwdriver, and off-the-shelf components from the hardware store for about 9 bucks.
The replacement dryer has had to have $1000+ circuit boards replaced more than once.
The WTF here is not necessarily that some component on the circuit board failed, but that the manufacturer charges $400-$1000 for it with a straight face and gets away with it when they undoubtedly have that board made in China for about $4 per unit.
The big thing you and a lot of posters are missing is what happens when those parts aren’t made anymore. With a standard motor that uses a start capacitor, you can get that cap or motor as a generic part or from another manufacturer, if your modern appliance eats its vfd board now, you can replace it for $$$. If it dies in 8 years, its probably already been discontinued and you are sol even if you wanted to pay for it.
Also imprecise engineering tended to overbuild things.
Thanks to better manufacturing techniques, engineering analysis, and the fine humans in management, we have gotten really good at barely building a machine that lasts just long enough to be out of warranty.
Increase in precision (materially and economically) then leads to rebound effects; higher precision should lead to lower material flows, but the opposite happens because the technological progress broadens the market when possible
Yeah also forever means from when you were 8 until you moved out, only 12 years… Appliances can still do that today.
Samsung has left the chat…
But there’s WAY more surviving devices from 1960 in 2020 than there will be from 2020 in 2080.
Right but none of the ones made these days last. Some > none.
I’m assuming CFC might have been a better coolant, that’s why those old fridges are so good
Planned obsolescence. They want you to keep buying overpriced shit as well as to collect all your data. Win win for them.
Smart features aren’t what make appliances break. Give me a fridge and a washer with Matter/Thread for local sensor readings from HomeAssistant and a compressor/motor that doesn’t die after 3 years and I’ll give you the $3k for a fridge that you demand
It won’t pass modern energy standards.
Ah, the good old days when your “dumb” refrigerator would kill children playing hide and seek because the latch wouldn’t open from the inside. When it was lined with asbestos because that’s literally the best insulation that exists excepting aerogel. When the mercury thermostat would fail—leaking mercury on to your food (and aerosolizing some which would be breathed in as soon as you opened it)—and it would freeze everything inside, complete with an interior wall of snow that could take days to defrost. It used old school freon, destroying the ozone layer. Or before then, fun highly toxic gasses like methyl chloride!
Those were the days! When a breeze through the house on a day with wonderful weather could blow out the pilot light in your oven, slowly leaking gas into your house, exploding and destroying the entire home late at night while everyone is asleep.
Then the wonders of electricity came along to produce ovens that were hooked up to 220V lines without a grounding wire, and wiring that would slowly fail over time, eventually making contact with the metal frame, electrocuting anyone who touched the device—or anyone that touched the person touching it.
Ovens were built different “back in the day”! They didn’t have anti-tip brackets, resulting in loads of children sitting on the oven door, spilling boiling liquids down upon them.
The best were those old washing machines, though! You could lift up the lid and look inside to see your laundry spinning at high speeds! Just don’t reach your hand in, or you could find out what the term “degloving” means.
Ah yes, the good old days of appliances.
But they had more fun colours for appliances
Speed queen. We just got ours and I’m never getting rid of them.
i have a new dumb washer and dryer set bought this year, and my previous dumb set bought in 2011 still working, the ex took them 😂
The family has a fridge that’s been going strong since before the fall of the Berlin Wall.
