I left the headlights on overnight and woke up to a dead battery.
Stupidly left my tools in the house as it was an impromptu trip out of the city.
So I wired the output on the solar charge connector to the permanent live on the head unit and left it for a while
You can just do things. There’s no real rules.
Once I used some jewelry wire to connect pins from a vga port on my PC to pins on the svideo port on my tv. Worked fine. It was black and white but I had a display.
Edit: I think I just connected the sync and then put the luma signal oitput into the composite video signal input.
I have a slim Playstation 2 still. It is modded. How is it modded?
Styrofoam in the disc tray sensor.
I can play burnt DVDs by just stating up a legit game (I have MGS2) and swapping the still spinning disc after the PS2 and Sony logos end, so long as the console doesn’t know the disc tray is open. The styrofoam prevents the console knowing the tray is open by keeping the button pressed down.
That’s not Zombo COM1:, that’s the serial port, the one above it. This is Zombo VGA.
i appreciate the title very much!
The only limit is yourself!
This coupled with my having just watched the interview with a steam engineer taking about 5 layer pcbs is making me question if I may not be a furry.
I am so conflicted about this meme; on the one hand I’m in awe at this bodge into the RCA port and on the other the caption made my eye twitch.
Had a cat engine in a crane once. A pin got damaged fir the ecm. Cat said 5k + labour to replace ecm plug. I said fuck you and any one that may slightly resemble you my good man. Went back to yard. Wittled down and ramed a solid 14awg wire in the hole. Been fine for over 5 years now.
They thought they had your nuts in a vise. But all they had was acorns.
Modern cables for high bandwidth data transfer just don’t have this kind of luxury. You can’t send 100 GB/s through a ramshackle connection.
This reminds me of The Etherkiller
Normal harddrives and cdroms want +5VDC and +12VDC. We give them 120 VAC. They like it. Ohhh, they like it.
🤣
I wonder… do we have any kind of cablegore or tech gore community around here?
Be the change you want to see in the world.
I’ll join you.
This reminds me of how my speakers work.
I have a 3.5mm jack for my speakers that converts to an RCA jack at the end, I also have T-intersection that goes between an amplifier and the RCA jack to intercept the signal and send it BACK to a set of desktop speakers.
Why? Bootleg surround sound, I know it’s just stereo, but hey, more speakers! Also it sounds better, and it can get louder.
It may get louder, but does it go to eleven?
Wait until you realize you only need 4 of those pins.
Five signals + ground if you want more than one color channel. The RGB ground might not be connected to the shell insde the monitor and both H-sync and V-sync are required.
Kids these days with their colors.
They routed the serial port to the other side of that header.
Wait until you realize you only need 3 of those pins.
I would really appreciate it if nobody looked at the PS/2 to USB adapter currently on my workbench, kplzandthx.
could you attach a picture of it? i want to be sure i don’t accidentally look at it by mistake
You’ve been warned.
I can’t make sense of it. Where is the PS/2 and the USB port?
Yeah, not the best angle. The PS/2 port is that little silver box. The USB-C port is on the PCB. This was assembled to go inside a vintage keyboard to semi-permanently convert it, but I’ve been using it to test other boards. If a board is fully intact, I’ll just use an external converter, but there used to be a practice of snipping the cables on hardware that businesses retired for accounting purposes if they were written off, which can be a good, if risky, way to get an eBay buy for cheap.
It’s beautiful, thank you
Oh no… I looked at it… I shouldn’t have done that.
I may have recently retired my IBM->PS/2->USB daisy chain because I was gifted a modern mechanical keyboard…
Well, I fell pretty deep into that rabbit hole, where I’ve even designed a couple of primitive circuit boards and hand-wired a bunch of keyboards. I also mess around with vintage stuff a bit.
This particular converter is programmable and meant to be used with a not mechanical 122-key terminal keyboard made by the company that took over IBM’s US keyboard factory, but it’s been hanging out with several DuPont wires shoved into it to connect it to a molex connector to test a different old board.
Somehow that VGA port became a cenobite.
It has such sights to show you.
The images that have traversed my wire span the entirety of sensation, from the darkest pits of depravity to the… Wait, no, that’s it.
Plot of the next disney hellraiser movie
“Welcome to Zombocom.”
This is zombocom
You can do anything at Zombocom
WEEEEELCOME…tozombocom
This is Zombocom
The only limit is your imagination.
This is zombocom and welcome to you have come to zombocom!
The power of Bogatin compels you!
😂 that’s great
