I am not overly happy with my current firewall setup and looking into alternatives.

I previously was somewhat OK with OPNsense running on a small APU4, but I would like to upgrade from that and OPNsense feels like it is holding me back with it’s convoluted web-ui and (for me at least) FreeBSD strangeness.

I tried setting up IPfire, but I can’t get it to work reliably on hardware that runs OPNsense fine.

I thought about doing something custom but I don’t really trust myself sufficiently to get the firewall stuff right on first try. Also for things like DHCP and port forwarding a nice easy web GUI is convenient.

So one idea came up to run a normal Linux distro on the firewall hardware and set up OPNsense in a VM on it. That way I guess I could keep a barebones OPNsense around for convenience, but be more flexible on how to use the hardware otherwise.

Am I assuming correctly that if I bind the VM to hardware network interfaces for WAN and LAN respectively it should behave and be similarly secure to a bare metal firewall?

  • Smash@lemmy.self-hosted.site
    link
    fedilink
    English
    arrow-up
    1
    ·
    7 months ago

    I use a Proxmox Cluster and assigned dedicated NICs to my OPNsense VMs (also clustered). I connected the NIC ports I assigned to the OPNsense VMs directly with a cable and reserved it for CARP usage. I can easily download with 1GB/s and the VMs switch without any packet loss during failover, 10/10 would do it again.