The power draw is 4 watts, not much more than a color LCD of this size and brightness, and most of it is the CRT heater. Very little ionizing radiation at 3 kV.
Bigger CRT TVs are even more power efficient by screen area, especially transistorized B/W ones, which were about as good as CCFL-backlit color LCDs.
The anode current for such a small screen area is pretty low. The flyback also provides a few hundred V to 1 kV for various grids like focus and brightness of the electron gun. Since they all use voltages adjustable in different ranges, a single series of resistors and potentiometers is employed as an adjustable potential divider, consuming usually less than 1 mA (1 W).
With such small sets (or ancient vacuum tube ones), the power draw of the electronics driving the deflection coils is also considerable. I’d guess about 2 W for the CRT heater, 1 W for the HV, 1 W for the sync, amplification and deflection.
If the microwave is broken you can put a Hotpocket up to it for 2 minutes.
The power draw is 4 watts, not much more than a color LCD of this size and brightness, and most of it is the CRT heater. Very little ionizing radiation at 3 kV.
Bigger CRT TVs are even more power efficient by screen area, especially transistorized B/W ones, which were about as good as CCFL-backlit color LCDs.
4W is impressive given how high voltages are needed for any CRT. I suppose the current must be minuscule to compensate?
The anode current for such a small screen area is pretty low. The flyback also provides a few hundred V to 1 kV for various grids like focus and brightness of the electron gun. Since they all use voltages adjustable in different ranges, a single series of resistors and potentiometers is employed as an adjustable potential divider, consuming usually less than 1 mA (1 W).
With such small sets (or ancient vacuum tube ones), the power draw of the electronics driving the deflection coils is also considerable. I’d guess about 2 W for the CRT heater, 1 W for the HV, 1 W for the sync, amplification and deflection.