🚀 Jellyfin Server 10.11.7
We are pleased to announce the latest stable release of Jellyfin, version 10.11.7! This minor release brings several bugfixes to improve your Jellyfin experience. As alway...
I believe your situation, that said I set up wireguard on my SO’s mac and all that is needed is to flip a switch in an app to connect. For my aunt, I’d likely set that up permanently since it only affects traffic when accessing the lan.
That’s why you do it at your router or gateway and then set a route for the Jellyfin server through the VPN adapter. That way any device on your network will flow through the tunnel to the Jellyfin server including TVs
Which again implies that you have a router that allows you to do so. It’s not always the case. For tech enthusiast people that’s the case. But not for everyone.
I tried to do the same thing at first, but it was a pain, there were tons of issues.
Reverse proxy will let anyone connect to it. VPN, you can create keys/logins for your intended users only. Having said that, from what I could see, nothing in the security fixes were to do with authentication. I think (just from a cursory look), they could only be exploited, if at all from an authenticated user session.
But personally, something like jellyfin where the number of people I want to be able to access it is very limited, stays behind a VPN. Better to limit your potential attack surface as much as you can.
Pangolin is based off of Traefik if I’m not mistaken, should be able to use Traefiks IPAllowlist middleware to blacklist all IP addresses and only whitelisting the known few, that way you can expose your application to the internet knowing you have that restriction in place for those who connect to your service.
Kinda defeats the purpose of a media server built to be used by multiple people
No need to expose jellyfin to the internet if you selectively allow peers on your lan via wireguard.
Easy for me but not my aunts, cousins or father in law to setup and use.
I believe your situation, that said I set up wireguard on my SO’s mac and all that is needed is to flip a switch in an app to connect. For my aunt, I’d likely set that up permanently since it only affects traffic when accessing the lan.
This attitude is why Plex remains popular.
I’d rather just not use it at that point
Fair, you do you, I get a lot of value out of it instead.
The difference is that my friends get a lot of value out of my server, as they don’t need to use any technology they’re unfamiliar with.
Use a VPN, it’s not ideal but it’s secure.
Somehow difficult to install on a TV though.
That’s why you do it at your router or gateway and then set a route for the Jellyfin server through the VPN adapter. That way any device on your network will flow through the tunnel to the Jellyfin server including TVs
Which again implies that you have a router that allows you to do so. It’s not always the case. For tech enthusiast people that’s the case. But not for everyone.
I tried to do the same thing at first, but it was a pain, there were tons of issues.
Don’t reverse proxies like pangolin just do the job? Does it have to be VPN in this particular concept? VPN isn’t like immune to vulnerabilities.
Reverse proxy doesn’t really get you much security. If there is an application level issue a reverse proxy will not help
Hmmm, I’m a bit rusty on this but can’t one put an auth gate in front of the application, handled by the reverse proxy?
You can, that would actually give you security. Not sure how many people do that. I assumed a straight reverse proxy without any auth
I see thanks. I’ll think about it more.
Reverse proxy will let anyone connect to it. VPN, you can create keys/logins for your intended users only. Having said that, from what I could see, nothing in the security fixes were to do with authentication. I think (just from a cursory look), they could only be exploited, if at all from an authenticated user session.
But personally, something like jellyfin where the number of people I want to be able to access it is very limited, stays behind a VPN. Better to limit your potential attack surface as much as you can.
Pangolin is based off of Traefik if I’m not mistaken, should be able to use Traefiks IPAllowlist middleware to blacklist all IP addresses and only whitelisting the known few, that way you can expose your application to the internet knowing you have that restriction in place for those who connect to your service.
If the people you want to have access have static, exclusive ip addresses. Which is pretty unusual, these days.
Oh yeah I’m aware, if people don’t want to use a VPN then I suggest this but give them the advisory warning.
Actually, recently I’ve been using a fork of IPAllowList which accepts DDNS addresses, but that usually is for more technical folk who would probably rather use a VPN then purchase a domain and associate it with their network.
Yahnlets see a roku use a VPN.