Ender 3 Pro is a completely offline printer. It has a microSD slot and a USB port, that’s it. No network connectivoty at all. It runs Marlin firmware which is a long-standing Arduino-based open source 3D printer firmware. It’s highly customizable and upgradable. I added a CR Touch bed probe to mine and rebuilt the firmware to enable the unified bed leveling features. It’s not the most user friendly but it’s a decent, cheap platform, fully open source, and puts out decent prints.
You can also run klipper on them if you want network connectivity. Granted you need a raspberry pi to run klipper so there is that.
After running klipper on my Ratrigs I can’t even consider Marlin anymore. Modifying a config file and restarting is less painful than having to compile and flash a bin for every modification or update.
As another 3d printing noob, why would I want my 3d printer connected and be in the mercy of some company? Feels like this dependency makes it so you don’t truly own the product.
Klipper wouldn’t do that at all on its own. It basically just uses an external computer to run the printer, rather than purely using the printers microcontroller. So you can connect to the computer remotely/over wifi and control the printer if you set it up to do so. It also makes it easier to add extra stuff like cameras, heaters, power switches, etc. too since it all runs through that computer and knows what the printer is doing.
That’s what I switched to about 2 months after getting my Ender 3 S1 Pro. Klipper running from a RPi, lets me push sliced files out over WiFi to the printer right from Orca. So much better than dealing with SD cards.
Ender 3 Pro is a completely offline printer. It has a microSD slot and a USB port, that’s it. No network connectivoty at all. It runs Marlin firmware which is a long-standing Arduino-based open source 3D printer firmware. It’s highly customizable and upgradable. I added a CR Touch bed probe to mine and rebuilt the firmware to enable the unified bed leveling features. It’s not the most user friendly but it’s a decent, cheap platform, fully open source, and puts out decent prints.
You can also run klipper on them if you want network connectivity. Granted you need a raspberry pi to run klipper so there is that.
After running klipper on my Ratrigs I can’t even consider Marlin anymore. Modifying a config file and restarting is less painful than having to compile and flash a bin for every modification or update.
As another 3d printing noob, why would I want my 3d printer connected and be in the mercy of some company? Feels like this dependency makes it so you don’t truly own the product.
Klipper wouldn’t do that at all on its own. It basically just uses an external computer to run the printer, rather than purely using the printers microcontroller. So you can connect to the computer remotely/over wifi and control the printer if you set it up to do so. It also makes it easier to add extra stuff like cameras, heaters, power switches, etc. too since it all runs through that computer and knows what the printer is doing.
That’s what I switched to about 2 months after getting my Ender 3 S1 Pro. Klipper running from a RPi, lets me push sliced files out over WiFi to the printer right from Orca. So much better than dealing with SD cards.